Yealink Forums
Yealink W52P Base Won't factory reset - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Yealink W52P Base Won't factory reset (/showthread.php?tid=19596)



Yealink W52P Base Won't factory reset - sentinelace - 08-04-2016 07:05 AM

admin and admin for password are not working. I have reset from handset with no luck. Pulled power, held in paging button, no go. Any ideas?


RE: Yealink W52P Base Won't factory reset - Lucia_Yealink - 10-13-2016 02:10 PM

(08-04-2016 07:05 AM)sentinelace Wrote:  admin and admin for password are not working. I have reset from handset with no luck. Pulled power, held in paging button, no go. Any ideas?

Hi Sir,

You can reset the W52P refer to the steps below:

1. connect the network cable to the base
2. long press the paging key on the base and not stop until step3 is finished
3. connect the power to base , waiting for the three lights on the base light up one by one , during the whole process, please keep pressing the paging key !
4. after the three lights all light up, release the paging key and reconnect the power supply