distinctive ring tone for 3CX - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: distinctive ring tone for 3CX (/showthread.php?tid=195) |
distinctive ring tone for 3CX - stash - 01-24-2013 04:02 PM Hi, Can someone give me guide on what to type in the XML template of 3CX to achieve distinctive ring tone per ring group or per call queue. Thanks, STASH RE: distinctive ring tone for 3CX - Yealink Support - 01-30-2013 08:07 PM (01-24-2013 04:02 PM)stash Wrote: Hi,Hi, you can download the document about how to use Distinctive Ringtone for your reference. , hope it can help http://www.yealink.com/Upload/document/HowtoUseDistinctiveRingtoneonYealinkPhones/HowtoUseDistinctiveRingtoneonYealinkSIPT2XPPhonesRev_610-20501446272.pdf And below is the message of the packet. INVITE sip:304@10.2.9.75:5062 SIP/2.0 Via: SIP/2.0/UDP 10.2.9.6:5000; branch=12345678999 Call-ID: ae261add1da05937d9b40ef0b137ba6e@ats9900 From: <tel:83003002;phone-context=+8610>;tag=7e44d086-CC-51-TRC-13380 To: <sip:3033@10.1.0.38> CSeq: 1 INVITE Allow: INVITE,MESSAGE,INFO,PRACK,PUBLISH,SUBSCRIBE,OPTIONS,UPDATE,BYE,CANCEL,NOTIFY,ACK,REFER Contact: <sip:conf=6115@58.60.106.105:5060> Max-Forwards: 68 Supported: 100rel,precondition Session-Expires: 1000 Min-SE: 1000 P-Called-Party-ID: <sip:861082002004@hw.cm.com> P-Asserted-Identity: <sip:861083003002@hw.cm.com>,<tel:+86-10-83003002> Content-Length: 205 Content-Type: application/sdp Alert-Info:http://10.2.4.164:8080/xi.wav;info=tony;x-line-id=0 v=0 o=861083003002 2208988800 0 IN IP4 10.10.10.101 s=TOMORROW c=IN IP4 10.10.10.101 t=3426895489 0 m=audio 15874 RTP/AVP 18 101 a=rtpmap:18 G729/8000 a=rtpmap:101 telephone-event/8000 a=sendrecv let me know if any misunderstanding. Best Regards! Yealink Support Team |