EXP38 and EXP39 - Export Config - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: EXP38 and EXP39 - Export Config (/showthread.php?tid=1942) |
EXP38 and EXP39 - Export Config - juanv - 06-24-2014 04:18 PM Hi Iam running a T46G with 3 x expansion modules fully configured..... My question is how do i export that settings/config to quickly re-apply when i loose my settings? If i upgrade my firmware or re-provision my phone i loose the exp config and need to manually re-enter all the settings........ Please Help !! RE: EXP38 and EXP39 - Export Config - Yealink Support - 06-24-2014 07:45 PM Hi juanv, The T46 only supprts the EXP40. What is expansion model do you use? Is it EXP38/EXP39 OR EXP40? You can export or import the configuration of the phone via webpage-> Settings->configuration-> Export or Import Configuration. Please refer to below picture. RE: EXP38 and EXP39 - Export Config - juanv - 06-26-2014 09:09 PM (06-24-2014 07:45 PM)Yealink Support Wrote: Hi juanv, Good Day, Thank you for the reply, Sorry my mistake, Iam using the EXP40 module on the T46G! Does this method also work on the EXP38 and EXP39 modules? RE: EXP38 and EXP39 - Export Config - Yealink Support - 06-27-2014 10:13 AM Hi juanv, Yes, but the EXP38 and EXP39 only ply to Yealink IP Phone SIP-T28P/SIP-T26P/SIP-T38. You can export it, and then import it. try it. thanks |