+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Remote control with UC edition firmware (/showthread.php?tid=19417)
Remote control with UC edition firmware - peter.meier@frox.com - 07-28-2016 09:12 PM
Hi
I am desperately trying to reboot my T46G with UC Edition firmware by Remote Control like this:
GET http://x.x.x.x/servlet?key=Reboot
The phone answers with 200 OK but nothing happens. None of the other Remote Control commands do work neither.
This happens with UC firmware 28.8.0.34.
If I revert the firmware to the non-UC edition, it works fine.
However, there is a difference in the two administrator guides for UC and non UC editions: The UC guide lacks most of the section about the remote control keys (Action URI). It only explains how to capture the screen, and that works.
Can it be that the UC edition does not support all other remote control commands at all?
RE: Remote control with UC edition firmware - Karl_Yealink - 09-07-2016 05:58 AM
Hi,
This is a SFB/Lync version, in this version, it can't be done.