+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Keep Alive Type : What is "Default"? (/showthread.php?tid=1905)
Keep Alive Type : What is "Default"? - neurosys - 06-17-2014 02:33 AM
What is the method of Accounts -> Advanced -> Keep Alive Type: Default uses? IE: Ping? Etc...
Thanks!
RE: Keep Alive Type : What is "Default"? - Yealink Support - 06-17-2014 09:16 AM
It configures the type of keep-alive packets sent by the phone to the NAT device to keep the communication port open so that NAT can continue to function for account X.
0-Dsiabled
1-Default: the phone sends UDP packets to the server.
2- Option: the phone sends SIP OPTION packets to the server.
3-Notify: the phone sends SIP NOTIFY packets to the server.
The default value is 1.
RE: Keep Alive Type : What is "Default"? - Iskratel - 10-08-2020 12:05 PM
(06-17-2014 09:16 AM)Yealink Support Wrote: It configures the type of keep-alive packets sent by the phone to the NAT device to keep the communication port open so that NAT can continue to function for account X.
0-Dsiabled
1-Default: the phone sends UDP packets to the server.
2- Option: the phone sends SIP OPTION packets to the server.
3-Notify: the phone sends SIP NOTIFY packets to the server.
The default value is 1.
What is the respond of terminal, if there is no replies to its Keep alive messages ?
Namely, we are looking for possibility that T27G terminal automatically disconnect the established SIP session if there is not respond to Keep alive message from Call server. Is it for any from listed (UDP, SIP OPTION or SIP NOTIFY) implemented such respond ?
BR, Franc