+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T3xP Series (/forumdisplay.php?fid=22)
+---- Thread: Multicast Paging (/showthread.php?tid=189)
RE: Multicast Paging - Yealink Support - 04-19-2013 05:07 PM
(03-15-2013 01:28 AM)jasit Wrote: Has there been any update when the Beta or final version of .71 will come out? Setting up a office in mid April and hope to have something in place then
J
Hello,
We will release T3X-V71 beta firmware in June, if you have any project need this, please contact your distributor, they will contact our special technical support team to deal with this.
Thanks.
RE: Multicast Paging - Yealink Support - 04-19-2013 05:10 PM
(03-01-2013 09:37 PM)xptpa2020 Wrote:(02-07-2013 06:38 AM)rfinch@elementpbx.com Wrote: We received word that v71 will be in beta in March so hopefully soon. I am losing deals because Multicast paging is not included with the current v70.
Is there any beta program so we can get it earlier?
I am in a similar situation where multicast paging is absolutely necessary. Without it its a deal breaker. Unfortunately, they have to have the T3x phones due to certain requirements. We would certainly like to see multicast released soon for this series of phones.
We've used Cisco and Polycom phones and have found that Yealink phones are by far the best deal, best overall functionality and in my opinion a better product. If multicast can be supported, I know we would be able to sell to several large customers in our area. The single biggest issue is our customers sign up for hosted systems and when they run a page all (using Asterisk, but the same with any hosted PBX), you have separate channels running to each device. This is obviously not very good when you have 75 phones and page all 75.
If there is a beta program to open up for the T3x series, please let us know.
Hello,
Don't worry, please contact your local distributor, they will contact our special technical support team to deal with this.
Any other questions please let us know.
RE: Multicast Paging - Yealink Support - 04-19-2013 05:15 PM
(03-15-2013 01:28 AM)jasit Wrote: Has there been any update when the Beta or final version of .71 will come out? Setting up a office in mid April and hope to have something in place then
J
Hello,
Our T3x-V71 will release beta firmware in June.
RE: Multicast Paging - Yealink Support - 04-19-2013 05:16 PM
Hello all,
Ok, you don't need to contact your distributor first, i will submit this issue to our engineer, and check when they can provide a special firmware which support multicast paging feature, so you can have it.
Any update will let you know ASAP.
RE: Multicast Paging - jasit - 04-22-2013 01:08 AM
Thank you, We just deployed 75 phones,mostly T32's but now they are looking at purchasing a multicast paging system and if we can do it through the phones right away that would be great, we are using the 3cx system
RE: Multicast Paging - Yealink Support - 05-03-2013 05:24 PM
Hello all,
Good news for you.
We already released the T38G and T32G firmware 3x.70.0.143 which supported Multicast paging feature, please download the firmware as below:
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/T3X/
Thanks.
RE: Multicast Paging - jasit - 05-03-2013 11:54 PM
I tried it out, it works, I cut and pasted the xml settings from a T26 xml file and filled in the settings.
#######################################################################################
## Multicast ##
#######################################################################################
#Configure the codec of multicast paging.
multicast.codec =
#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default);
#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority.
multicast.receive_priority.enable =
#Configure the priority of multicast paging calls. It ranges from 0 to 10.
multicast.receive_priority.priority =
#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10.
#multicast.listen_address.X.ip_address =
multicast.listen_address.1.ip_address =
#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10.
#multicast.listen_address.X.label =
multicast.listen_address.1.label =
RE: Multicast Paging - Yealink Support - 05-04-2013 11:04 AM
Hello all,
Good news for you.
We already released the T32G and T38G firmware 3x.70.0.143, which support multicast paging feature, please download them from below link:
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/T3X/
Thanks.
RE: Multicast Paging - CWR - 05-10-2013 04:24 AM
this is great - but why isn't it on the support page?
a lot of us have been anxiously awaiting a v70 release with multicast... I didn't think it would be hidden in here...
RE: Multicast Paging - Yealink Support - 05-27-2013 10:18 AM
Hello all,
Good news for you.
We already release special T3X firmware, which support Multicast paging feature, please download the firmware as below:
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/T3X/
Thanks.