Yealink Forums
Direct Call Pickup Codes - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Direct Call Pickup Codes (/showthread.php?tid=1856)

Pages: 1 2


RE: Direct Call Pickup Codes - CWR - 06-12-2014 07:20 AM

I see this in their manual:
Code:
How to use Remote Pickup
To pickup an incoming call from another phone, simply dial ** and then either the Short Code
(similar to extension number) or the MyNetFone number of the phone that you want to pick up
the call from.
For example: Phone ‘A’ has a Short Code of 2000 and a MyNetFone Number of 09001234.
If Phone ‘A’ receives an incoming call, you can remotely pick it up from any phone on the
same Virtual PBX account by dialing either **2000 or **09001234.

So with a T46 - I would just make a DSS Key for each extension as the pickup - maybe like a Speed Dial.
Label is what shows on the screen, value would be **<number as above>

Perhaps also try setting Direct Call Pickup value to ** and Create a BLF DSS Key for the extension. The BLF Value is the ShortCode. The Label is the persons Name, the extension is their extension.