![]() |
HTTP proxy - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: HTTP proxy (/showthread.php?tid=18533) |
HTTP proxy - demian2712 - 07-15-2016 05:35 PM Is there a way to set a HTTP proxy on the phone ? I would like to use some action URLs to send messages to a web server (on the internet) but the problem is that my phone is in a private network. Because i have no access to the internet from this network my idea is to configure a http proxy (on a server that the phone can reach) to forward the messages. I have a T27P phone (firmware is 45.80.0.25) thanks in advance RE: HTTP proxy - Yealink_Michael - 11-21-2016 05:46 AM hi thanks for your information but i am a little confused , for Yealink phones , we can send action URL to the server you configured , but if it is a server that phone can't reach , then it is not phone side issue. for my opinion , you can try to set a HTTP proxy as you talked and then configure this proxy on phone side , then phone will send action URL to this proxy , the the following things are related on your network side , you need to make sure that the proxy can successfully forward the URL to the real server and then make sure the format is correct . for the other side , if you can set your server to the local network or open the permission for phones to connect the internet , that would be better . TKS & BR Michael |