Yealink Forums
T46G - Any way to stop auto dialing when picking up the handset? - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G - Any way to stop auto dialing when picking up the handset? (/showthread.php?tid=1845)



T46G - Any way to stop auto dialing when picking up the handset? - nicknomo - 05-31-2014 01:07 AM

I'm using the T46G with current firmware.

It seems as though if you start dialing, and then pick up the handset, it immediately starts to dial what you've entered. A lot of times, I'll start to enter a number, then pick up the handset, only to dial an incomplete number.

I looked through the menus, but couldn't find a way to turn this off... Is there an option for this that I'm missing?


RE: T46G - Any way to stop auto dialing when picking up the handset? - Yealink Support - 06-03-2014 02:08 PM

Sorry. It is the default setting. You should pick up the handset and dial the number or dial the number then pick up the handset to sending the numbers.