Yealink Forums
Call Park T38G - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Call Park T38G (/showthread.php?tid=1840)



Call Park T38G - soapee01 - 05-29-2014 11:21 PM

Hi:
Version
Firmware Version 38.70.0.132
Hardware Version 21.5.5.160.64.0.0

The switch is FreeSWITCH.

I've got one annoyance with this phone that hopefully someone knows how to correct. When a call is parked (DSS Key set to Call Park), it will park and pickup calls correctly, except when you pick up the receiver first in unpark. It seems that the only way to pick up a parked call is to hang up the receiver, and push the park button. The call then goes to speakerphone at which point you can then pick up the receiver. Is there any way to change this behavior?

Thanks!

James


RE: Call Park T38G - CWR - 05-29-2014 11:31 PM

This is the behavior on these phones... Would love to see a v71 or v72 that cleans these phones up but it seems they are opposed to further development.


RE: Call Park T38G - soapee01 - 05-30-2014 12:53 AM

(05-29-2014 11:31 PM)craigreilly Wrote:  This is the behavior on these phones... Would love to see a v71 or v72 that cleans these phones up but it seems they are opposed to further development.

Does this behavior exist on the T4x series? Thinking about picking up the T42 and T46 and putting them on the lab bench.


RE: Call Park T38G - Yealink Support - 05-30-2014 04:08 PM

Hi soapee01,

T4X doesn't have this issue in V71 or V72.