Ring around after call ended - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: Ring around after call ended (/showthread.php?tid=1838) |
Ring around after call ended - anthonycleaves - 05-29-2014 07:22 PM Hello, I am seeing some intermittent errors with Yealink phones. We have a PBX with a ring group of 4 extensions. When an inbound call comes in, a user answers but the other phones continue you to ring for a further 3-4 seconds. I have looked on the server, and I can see that the server is sending no options packet back to the router but the phone logs it's self don't really show anything. Quote:1889:[2014-05-20 14:51:02] -- Executing [h@default:1] NoOp("Local/nvm2886602@default-0002015a;2", "") in new stack ^ log from the server Quote:U 2014/05/20 14:51:02.339409 109.224.232.93:5060 -> 109.224.240.164:5060^ Sip msg from the server Attached is the phone logs of the phone that continued to ring. Has anyone got any experience of this problem before? I have had reports of this happening on Snom phones but I am yet to see evidence of this. Any input here would be great. RE: Ring around after call ended - Yealink Support - 06-03-2014 05:41 PM Hi anthonycleaves, Pleae test below firmware which may have solved your issue. 7.70.23.12.rom |