+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: Cannot sign in to Skype for Business T46G (/showthread.php?tid=18209)
Cannot sign in to Skype for Business T46G - WerVermaak2 - 07-12-2016 11:24 AM
We are using Skype for Business on premises server. The Firmware license on the T46G was successfully installed.
Current FW: 28.8.0.34
SFB License: Active
We have tried to sign in several times and only receive the message 'Register Failed'.
Login address: xxxx.xxxx@domain.co.za
Register name: domain\username
Password: xxxxx
Is there anything specific we need to change on our Edge or should I point the phone somewhere to autodiscover the information?
We are not using autoprovisioning to mass deploy as we only use four units.
Any feedback / assistance would be appreciated. Been struggling with this for days now.
RE: Cannot sign in to Skype for Business T46G - WerVermaak2 - 07-12-2016 02:26 PM
SOLVED
Managed to find the problem.
Under SECURITY settings > DISABLE > Only accept trusted certificates.
>REBOOT > Sign in > User registration successful
Such a small thing can cause such a big headache.