LDAP search not working - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: LDAP search not working (/showthread.php?tid=1795) |
LDAP search not working - bottom98 - 05-21-2014 08:48 PM Hi, I can't get the LDAP search to work with our Active Directory, always come back with 'No results' is the syntax correct, any ideas what I could be doing wrong... LDAP Name Filter - (|(cn=%)(sn=%)) LDAP Number Filter - (|(telephoneNumber=%)(Mobile=%)(ipPhone=%)) Server Address - 192.168.100.245 Port - 389 Base - DC=domain,DC=local User Name - domain\administrator Password - ******* Max. Hits(1~32000) - 1000 LDAP Name Attributes - cn sn LDAP Number Attributes - Mobile telephoneNumber LDAP Display Name - %cn Protocol Version3 Search Delay(0~2000)ms - 2000 Match Incoming Calls - Enabled LDAP Sorting Results - Enabled LDAP Lookup For Pre-dial/Dial - Enabled Thanks Nick RE: LDAP search not working - Yealink Support - 05-30-2014 06:51 PM Hi Nick, Why do you set Search Delay(0~2000)ms - 2000 for so long? What is the firmware of your phone? Do you refer to the LDAP user guide for more details? RE: LDAP search not working - bottom98 - 05-30-2014 07:14 PM Hi, 2000ms was just what I've seen on other posts, have tried lower but still didn't work. Current firmware is 38.70.0.198 and yes I followed the guide but with no joy. RE: LDAP search not working - Yealink Support - 06-03-2014 11:39 AM Hi bottom98, Sorry. This firmware has issue in LDAP mode. Do you test other firmware? such as 38.70.0.125 ? http://www.yealink.com/SupportDownloadfiles_detail.aspx?ProductsID=31&CateID=182&flag=142 RE: LDAP search not working - CWR - 06-03-2014 01:01 PM Can you fix 198 since it has multicast paging... I don't think 125 has thy feature... |