+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Persistent Ring Volume (/showthread.php?tid=1769)
Persistent Ring Volume - jonnietexas - 05-17-2014 05:47 AM
On a T22P, is there a way to force the phone to have a persistent ring volume?
thanks!
RE: Persistent Ring Volume - Yealink Support - 05-17-2014 10:28 AM
Do you want to keep ringing until you pick up the call?
RE: Persistent Ring Volume - jonnietexas - 05-18-2014 04:16 AM
(05-17-2014 10:28 AM)Yealink Support Wrote: Do you want to keep ringing until you pick up the call?
It would be nice if it would roll to voicemail. Currently we use FreePBX and have the phones going to voicemail after 20 seconds. Ideally they would pick up the phone.
RE: Persistent Ring Volume - Yealink Support - 05-19-2014 06:51 PM
You can confgure this in PBX and phones can support up to 120 seconds.
RE: Persistent Ring Volume - jonnietexas - 05-19-2014 09:04 PM
(05-19-2014 06:51 PM)Yealink Support Wrote: You can confgure this in PBX and phones can support up to 120 seconds.
Thanks for the response. My question is about ring volume...not duration. The issue we're having is that people are turning the volume all the way down and then the phones aren't ringing. They are then complaining to management that the phones don't work. Clearly they do work but I can't continue to dispatch people just to turn up the volume on phones.
RE: Persistent Ring Volume - Yealink Support - 05-30-2014 02:11 PM
Hi jonnietexas,
You can use user access level to control this setting that don't allow other users to change it.
http://www.yealink.com/Upload/T4X/20140102/Yealink%20SIP-T4X_IP_Phone_Configuration_Guide_for_User_Access_Level_V72_1.pdf