+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: No Line? (/showthread.php?tid=17687)
No Line? - IanC - 07-04-2016 05:03 PM
Hi Folks. I have just set-up and registered a second handset on my 2 handset system. Only one account.
The registration seems fine and I can page the handset and share contacts etc. However, the line status shows a red handset and a block symbol, and there is no line available to call out on.
Did I screw up the registration / set-up? The first handset works as expected with no problems.
Feedback appreciated.
Handset v 26.73.0.11 on both.
Base Firmware v 25.73.23.3
RE: No Line? - complex1 - 07-04-2016 05:42 PM
Hi,
Did you also setup the Incoming and Outgoing lines in Account > Number Assignment?
Incoming and Outgoing lines: Connect Handset 1 and 2 both to Line No. 1
RE: No Line? - IanC - 07-04-2016 05:50 PM
No, I hadn't done that - many thanks for the feedback Frank.
Now fixed.
Cheers
Ian