Yealink Forums
[FAQ]How to click to dial from webpage in Yealink T2/T3/T4 Series Phone? - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: FAQs etc (/forumdisplay.php?fid=38)
+--- Forum: FAQs (/forumdisplay.php?fid=39)
+--- Thread: [FAQ]How to click to dial from webpage in Yealink T2/T3/T4 Series Phone? (/showthread.php?tid=1761)



[FAQ]How to click to dial from webpage in Yealink T2/T3/T4 Series Phone? - Yealink Support - 05-16-2014 11:41 AM

Yealink T2/T3/T4 Series support to click to dial in directory/history from webpage.
Let me show how to realize this feature in Neutral Firmware.

(Take T26-V72 for example)

1. Login the webpage-entering the username and password
If you use custom firmware, please make sure that your distributors or sellers don't ban you to login the webpage.

2. Click Features->Remote Control, fill IP address of your computer in Action URI allow IP List.
In T3 Series, click Phone->Features->Remote Control Security, fill the IP address of your computer in Trusted Action URI Server List.

[Image: attachment.php?aid=746]

3. Click Directory->Phone Call Info, directly click the number that you want to dial or enter the number you want to dial. It will prompt "call success".

[Image: attachment.php?aid=747]

4. When the IP phone receives a GET request from the specified IP address for the first time, the LCD screen of phone prompts the message "Allow Remote Control?". You need to press OK or Cancel Softkey.

[Image: attachment.php?aid=749]

5. Then you can dial out successfully.

Please be aware:

The purpose of these forums is to allow forum members collaborate and help each other.
Questions posted here won't be appreciated.
If you require assistance from Yealink technical support, please email to support@yealink.com or USA support support.usa@yealink.com