T22P, 7.70.0.120 firmware: Call Panel dialling fails - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: T22P, 7.70.0.120 firmware: Call Panel dialling fails (/showthread.php?tid=173) |
T22P, 7.70.0.120 firmware: Call Panel dialling fails - peterf - 01-10-2013 12:20 PM After upgrading to 7.70 on my test phone dialling via the Dial a Number entry box in the Call Panel in Contacts=>Phone Call Info no longer works. It now pops up a box with text "Warning:Dial Failed!" This feature is very handy for dialling via cut and paste and worked great in the previous version. Any ideas? thanks RE: T22P, 7.70.0.120 firmwaCall Panel dialling fails - Flora_Yealink - 01-10-2013 02:33 PM (01-10-2013 12:20 PM)peterf Wrote: After upgrading to 7.70 on my test phone dialling via the Dial a Number entry box in the Call Panel in Contacts=>Phone Call Info no longer works. It now pops up a box with text "Warning:Dial Failed!" Hi, The reason why this issue happen is the IP address of the PC which you use is not the trust action URI server , so that the phone didn't allow the phone to dial the number out. Please try as the below ways , 1. For example IP address of the pc you use is 10.2.4.112. 2. Login the web UI, go to Phone->Features->Remote Control Security and fill the parameter of Trusted Action URI Server List with 10.2.4.112,if you want to configure it with more than one IP address ,please separate them by a comma(,) 3. Then you enter the number you want to dial out in the call panel, when click, the phone LCD will prompt a warning " Allow Remote Control ?" please press the OK button, then the phone will dial out the call. Best Regards! Flora RE: T22P, 7.70.0.120 firmware: Call Panel dialling fails - peterf - 01-10-2013 04:25 PM Hi Flora this worked. Thanks alot. It does raise a question though. If I am provisioning the phone via a provisioning server I will not know the IP address of any particular phone users PC, especially if the network uses DHCP, which is most cases. At best I will know the subnet of the network, eg 10.1.1.1/24. Can this be entered instead of a long list of possible IP address? thanks RE: T22P, 7.70.0.120 firmware: Call Panel dialling fails - riroga - 05-20-2014 01:35 AM wich purpose is calling from the call panel? appreciated if someone could tell me RE: T22P, 7.70.0.120 firmwaCall Panel dialling fails - mordechai - 12-10-2014 09:50 PM (05-20-2014 01:35 AM)riroga Wrote: wich purpose is calling from the call panel? it's very good for an call api... |