+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Locking device TG-46 (/showthread.php?tid=1710)
Locking device TG-46 - fhbelan - 05-08-2014 09:11 PM
Good day. I have a Yealink TG-46, and I'm having problems during the workday catching this equipment, this crash is happening when there are many incoming links, this occurs when the machine just hangs, I can not use for anything else, I'm off it and turn it on again.
I have this machine connected to an Asterisk server with FreePBX E1.
Thank you. I look!
RE: Locking device TG-46 - Yealink Support - 05-08-2014 09:29 PM
Do you mean you can't use T46G because it is locked when many incoming calls in?
RE: Locking device TG-46 - fhbelan - 05-09-2014 07:10 PM
(05-08-2014 09:29 PM)Yealink Support Wrote: Do you mean you can't use T46G because it is locked when many incoming calls in?
Yes.
(05-08-2014 09:29 PM)Yealink Support Wrote: Do you mean you can't use T46G because it is locked when many incoming calls in?
The equipment is catching when it receives about 10 incoming links (incoming), then takes it off and turn it on again to use normally.
RE: Locking device TG-46 - Yealink Support - 05-12-2014 12:13 PM
Hi fhbelan,
Please use the latest firmware and check again.
If the issue is still on, please contact your distributor for help.
RE: Locking device TG-46 - fhbelan - 05-13-2014 11:58 PM
(05-12-2014 12:13 PM)Yealink Support Wrote: Hi fhbelan,
Please use the latest firmware and check again.
If the issue is still on, please contact your distributor for help.
Ok Thanks for the help!