Yealink Forums
Action URI request for DND - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Action URI request for DND (/showthread.php?tid=16828)

Action URI request for DND - - 06-22-2016 02:28 AM

I need to allow my phone system to issue the http get to my phones via the Action URI. I have it working, but it pops up the Remote Control approval even when I have the allowed IP on the phone and I'm passing the username/password in the request (http://username:password@ip/servlet?key=DNDOn).

I have over 200 phones and growing, I auto provision them so I don't have to configure them individually. Is there a way to avoid the Remote Control request from popping up the first time it's called?

RE: Action URI request for DND - Karl_Yealink - 06-23-2016 10:02 AM

Please auto provision the syntax below.
features.show_action_uri_option =
0-disable 1-enable

If you configure the parameter as 0, the phone won't pops up again.

RE: Action URI request for DND - - 06-23-2016 09:03 PM

Thank you so much! I'll make that change and do some test.