+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Problem with Connected Line Presentation on UPDATE or Re-Invite (/showthread.php?tid=16825)
Problem with Connected Line Presentation on UPDATE or Re-Invite - adame - 06-21-2016 11:53 PM
When BroadWorks sends a re-Invite with P-Asserted-ID header, the Connected line number is not updated at the T4x end after upgrading to v80 (T41-36.80.193.95.rom). It was working in v73.
I have followed the guide
http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-7-17%2F3%2F63908173-c3cd-40be-b385-8e4cbc063c8c%2FCalling+and+Connected+Line+Identification+Presentation+on+Yealink+IP+Phones_V80_60.pdf
I have also tried with
account.1.refresh_remote_id.enable = 1
from http://www.yealink.com/Upload/UCOne/20160420/PartnerConfigGuide_Yealink_W52P.pdf
Thanks,
Adam
RE: Problem with Connected Line Presentation on UPDATE or Re-Invite - adame - 06-22-2016 05:20 PM
UPDATE!
It is working now!
Did a factory default of the phone and tested again with:
account.1.refresh_remote_id.enable = 1
account.1.cid_source = 2
account.1.cp_source = 0
ps. Yealink, could you please document the "account.1.refresh_remote_id.enable = 1". It is not mentioned in:
http://www.yealink.com/Upload/UCOne/20160128/PartnerConfigGuide_Yealink_T4x_Series.pdf
or any release notes, only in partner guides for W52 and T2XX
Thanks,
Adam