+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: how to erase SIP accounts on SIP-T3X Phones (/showthread.php?tid=1678)
how to erase SIP accounts on SIP-T3X Phones - amvalente - 04-30-2014 11:57 PM
I've been trying to erase some some accounts in my SIP-T32 phone
through auto provision without success. Actually I'm using the 32.70.0.130 firmware version and i've set the the value %NULL% in the parameters that I want to reset to factory settings without success.
I've used this method before in other Yealink phone (SIP-T28P) with success.
I've also tried to pass a configuration file where the parameters are empty but it didn't change anything.
How it is supposed to proceed in this SIP-T32G phone to set the parameters back to factory settings after a previous configuration?
Thanks in advance,
RE: how to erase SIP accounts on SIP-T3X Phones - Yealink Support - 05-03-2014 10:40 AM
Sorry. T3 Series don't support %NULL% parameter. Please leave them blank and try again.
RE: how to erase SIP accounts on SIP-T3X Phones - amvalente - 05-05-2014 04:57 PM
(05-03-2014 10:40 AM)Yealink Support Wrote: Sorry. T3 Series don't support %NULL% parameter. Please leave them blank and try again.
I've already tried that, but the phone seems to ignore the empty parameters.
The scenario is:
1) through auto provision I send the following configuration file to the phone:
#!version:1.0.0.1
account.1.auth_name = test
account.1.enable = 1
account.1.label = test
account.1.display_name = test
account.1.outbound_host = 1.1.1.1
account.1.outbound host = 5060
account.1.outbound_proxy_enable = 1
account.1.password = test
account.1.sip_server_host = 1.1.1.1
account.1.sip_server_type = 0
account.1.user_name = test
linekey.1.line = 1
linekey.1.type = 15
2) then I change my mind and I want to leave account 1 blank and program account 2. I send the following configuration file, once again through autoprovision:
#!version:1.0.0.1
account.1.auth_name =
account.1.enable =
account.1.label =
account.1.display_name =
account.1.outbound_host =
account.1.outbound host =
account.1.outbound_proxy_enable =
account.1.password =
account.1.sip_server_host =
account.1.sip_server_type =
account.1.user_name =
linekey.1.line = 1
linekey.1.type = 15
account.2.auth_name = test2
account.2.enable = 1
account.2.label = test2
account.2.display_name = test
account.2.outbound_host = 1.1.1.1
account.2.outbound host = 5060
account.2.outbound_proxy_enable = 1
account.2.password = test2
account.2.sip_server_host = 1.1.1.1
account.2.sip_server_type = 0
account.2.user_name = test2
linekey.1.line = 1
linekey.1.type = 15
Result : the phone kept the both configurations and looking to the level 6 syslog I noticed the following :
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.auth_name
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.enable
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.label
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.display_name
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.outbound_host
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.outbound_port
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.outbound_proxy_enable
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.password
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.sip_server_host
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.sip_server_port
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.sip_server_type
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.user_name
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :869 ] IFO Update Config Model Parse Finished !
May 5 08:35:33 autop[426]: [./src/autoServer.cpp :755 ] IFO Upgrade finished [OK] !
May 5 08:35:33 autop[426]: [./src/autoServer.cpp :843 ] IFO <<<<<< Autoprovision End >>>>>>
So there's no way to erase the previous configurations through autoprovison, right ? I think this is a huge problem, because it jeopardize the utility of autoprovision.Can I expect future firmware releases on these SIP-T3X phones with %NULL% parameter to reset to factory settings the unused parameters?
Thank you for the prompt answer and hoping that there is a way to solve my problem, hope to hear from you soon
RE: how to erase SIP accounts on SIP-T3X Phones - Yealink Support - 05-05-2014 07:03 PM
Please upgrade 3.70.0.171 (RPS firmware)and test again. This firmware can use %NULL% parameter.
32.70.0.171.rom
RE: how to erase SIP accounts on SIP-T3X Phones - amvalente - 05-05-2014 08:49 PM
it works like a charm, thank you , it really did the trick i wanted
this firmware is not available in yealink.com web site ( the last firmware I found there was the release 32.70.0.130) why is that ?
By any chance do you also have this "new" firmware for the SIP-T38G ? I will need this firmware too
Thank you
RE: how to erase SIP accounts on SIP-T3X Phones - Yealink Support - 05-06-2014 02:49 PM
I think you can try below T38G's latest RPS firmware.
38.70.0.171.rom(RPS)
RE: how to erase SIP accounts on SIP-T3X Phones - xpedeus_jc - 01-22-2015 12:29 AM
(05-06-2014 02:49 PM)Yealink Support Wrote: I think you can try below T38G's latest RPS firmware.
38.70.0.171.rom(RPS)
Is there any possibility that a multicast supported firmware that also supports %NULL% and RPS will ever exist for the T38 and T32 phones?
I know of the xx.70.0.143 firmware that contains multicast paging support, but I find more issues with this with this firmware like the lack of %NULL% support, and lack of RPS support and sometimes will not provision without doing a full reboot (as opposed to being able to click on Phone Settings -> Auto Provision -> Auto Provision Now...)