T38G Call Forwarding and Speaking - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T3xP Series (/forumdisplay.php?fid=22) +---- Thread: T38G Call Forwarding and Speaking (/showthread.php?tid=1675) |
T38G Call Forwarding and Speaking - comtainmentgmbh - 04-30-2014 05:28 PM Hello, i have 8 x the T38G VOIP in our Company, with registred Accounts on each and green shining leds and the extra keys on the right (DSS Keys). But when i got a call and press forward and the green key from Company Member 1. The Call goes straigt to him, but i want first speak with member 1 and when i lay the telefon off, then i want the call to forward to Member 1. Do i have to use * or # for this? They all are BLF Users. Thank you and best Regards, Sebastian Haas RE: T38G Call Forwarding and Speaking - Yealink Support - 05-04-2014 11:08 PM You can enter the webpage->Phone->Features->Transfer Settings, select Attended Transfer from the pull-down list of "Transfer Mode via DSSKEY". |