+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T3xP Series (/forumdisplay.php?fid=22)
+---- Thread: Dial-Now (/showthread.php?tid=1672)
Dial-Now - koolandrew - 04-30-2014 03:15 AM
We need to speed up the dial now settings for the SIP-T2X phones. There doesnt appear to be any settings to change this feature. There is a unneccessary delay after the number is dialled.
I have noticed that this is available for the SIP-T3X phones under
Phone->Features->General Information->Dial-now Time out (seconds).
Please make this available for the SIP-T2X phones.
RE: Dial-Now - CWR - 04-30-2014 07:00 AM
"Time-Out for Dial-Now Rule" is under Features - General Information. But this is if you have a Dial-Now rule setup (Settings, Dial Plan, Dial-now).
Perhaps you want Settings -> Preference.
- enable LIVE DIAL PAD (Dial tone upon hitting first key)
- set Interdigit Time to a value between 1-14.
So if you have live dial pad "ON" and Interdigit set to 2 and you are dialing... if you pause for 2 seconds - it will DIAL. Some people prefer the # to send as they are looking back and forth to dial a number and get frustrated when phone dials automatically. We do not enable Live Dialpad. We let users hit # or SEND.