Yealink Forums
Call Pick Up issue in T20 & T26 - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Call Pick Up issue in T20 & T26 (/showthread.php?tid=1664)



Call Pick Up issue in T20 & T26 - pklobasa - 04-28-2014 05:46 PM

Hello,

I have noticed issue with the call pick up feature in Yealink T20 & T26 with BW releases 9.71.193.6 & 6.71.193.6.

Technically calls are disconnected by SIP BYE request from phones a few seconds after ACK with SDP is receive from BW AS. The call flow is :

UA (phone) <-> BW AS
->INVITE with call pickup FAC ->
<- 100 Trying<-
<- 200OK SDP<-
-> ACK->
<- INVITE without SDP to trigger a new media offer <-
-> 100 Trying ->
-> 200OK with SDP offer->
<- ACK with SDP answer <-
.....few seconds without any action...
-> BYE ->

If I check debug logs I don't see any indication why call pick up service with a new media offer isn't processed. There are only these lines:

Nov 20 17:08:17 Log [372]: SCRN<6+info > SCREEN_MSG_LIGHT_STATUS_CHANGE[0xffffff][0x0]
Nov 20 17:08:17 Log [372]: SCRN<6+info > Open back light Time[16777215] Level[2].
Nov 20 17:08:17 Log [502]: TALK<6+info > talkui Action to logic [iSessionID=1][iActionType=2][wP=130][lP=0]
Nov 20 17:08:17 Log [502]: VOIC<6+info > CVoiceManager::OnKeyPress iKey=130
Nov 20 17:08:17 Log [502]: TALK<6+info > talkui Action to logic [iSessionID=1][iActionType=8][wP=1][lP=0]
Nov 20 17:08:17 Log [502]: CUIT<6+info > PostMSGToSIPThread: Post Msg[40004] to sip thread0:[1554924375][0]
Nov 20 17:08:17 Log [502]: TALK<6+info > CSessionManager::DeleteSession start
Nov 20 17:08:17 Log [502]: TALK<6+info > CSessionManager::DeleteSession delete pSession [ID:1]
Nov 20 17:08:17 Log [502]: TALK<6+info > CSingleSession::SaveCallHistory [1][16]

Please check attached traces and debug logs.

Thank you in advance.

Petr

Unfortunately I can't attach pcap trace in this forum


RE: Call Pick Up issue in T20 & T26 - Yealink Support - 05-04-2014 10:09 PM

Do you follow the "Quick Setup Call Pickup" in Yealink website broadsoft solution?
Quick Setup Call Pickup


RE: Call Pick Up issue in T20 & T26 - pklobasa - 05-09-2014 12:55 AM

[quote='Yealink Support' pid='7074' dateline='1399212577']
Do you follow the "Quick Setup Call Pickup" in Yealink website broadsoft solution?

Yes, of course issue will be related to ACK with SDP, how I can attach pcapng file ? Do you want configuration file ?


RE: Call Pick Up issue in T20 & T26 - Yealink Support - 05-09-2014 09:40 AM

Hi pklobasa,

Can you supply syslog level 6, config.bin and pcap to your distributor?
How to Get the Correct Syslog, Config.bin and Trace
They can help you with this ACK with SDP issue locally and quickly.
If they can't help you, they will submit to the corresponding technical specialist.