A way to set the default gateway / next Hop via DHCPv6 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +--- Thread: A way to set the default gateway / next Hop via DHCPv6 (/showthread.php?tid=1657) |
A way to set the default gateway / next Hop via DHCPv6 - GeorgSchwarz - 04-28-2014 06:17 AM As our prerequisites force us not to use Stateless autoconfig, we need a way to set the default gateway via DHCPv6. After doing some research, I have come up with the following possible solutions: https://www.isc.org/blogs/routing-configuration-over-dhcpv6-2/ We would need the yealink phones to honor one of the options described in the article above. For us,option 242 (just the next hop) would suffice…. Does Yealink plan to honor the option. If yes, what is the timeline for it to be taken into the firmware? RE: A way to set the default gateway / next Hop via DHCPv6 - Yealink Support - 04-28-2014 11:19 AM If you need this new request, please ask your distributor for help. They will submit your request to the corresponding technical specialist. |