+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: Custom dial tones [SOLVED] (/showthread.php?tid=1624)
Custom dial tones [SOLVED] - Raffles - 04-22-2014 06:59 PM
Hi,
In order to "turn off" the voicemail notification tone, I had to make the country a "custom" one and set "stutter" to 0.
Trouble is, when I call another handset internally, I get a USA style ringing in my ear. If I change the country back to Great Britain, I get a UK ring but the voicemail beep is back.
Is there either a way to turn off the voicemail beep without changing the country or can I put GB parameters in under 'custom' (if the latter, what does the T2x use when set to GB)?
cheers
RE: Custom ringtones - Yealink Support - 04-23-2014 08:50 PM
You can set "shutter" as 0 and set your other tone as Britain Tone.
RE: Custom ringtones - Raffles - 04-23-2014 10:09 PM
If I set the country to Great Britain, all the other options are greyed out.
If I set the country to Custom, I can then set 'stutter' to 0 (but get US style tones).
Are you suggesting I set stutter to 0 first, then set the country to GB?
If so, how can I do this via. auto-provision?
cheers
EDIT: Tried setting stutter to 0 before setting country to GB but still get the voicemail tone
EDIT EDIT: Just found "Voice Mail Tone" (Features/General Information). How do I disable this via. auto provision as I can't seem to find it mentioned in the PDF's?
RE: Custom dial tones - CWR - 04-24-2014 02:11 AM
try this
Features.VoiceMailTone = 1/0
RE: Custom dial tones - Raffles - 04-24-2014 03:30 PM
(04-24-2014 02:11 AM)craigreilly Wrote: try this
Features.VoiceMailTone = 1/0
Thanks for this, but I finally found it after a lot of digging:
features.voice_mail_tone_enable = 1/0 (1=enable. 0=disable).
