+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Broadsoft ACD feature with Yealink T4x (/showthread.php?tid=1623)
Broadsoft ACD feature with Yealink T4x - acantho - 04-22-2014 05:15 PM
Hello all,
I'm testing the Broadsoft ACD syncronization using T46G and T41P.
I configured both the phones following the guide "Quick_Setup_ACD_on_Yealink_IPPhoneswith_Broadsoft_UC_ONE_V1.0.pdf" and I can get the "Login" button on a programmable key of both phones, but no "Available/Unavailable" button, as described in the guide.
Using wireshark, we can see the SUBSCRIBE msg sent to the AS when we press the Login button (and the corresponding 200 OK sent back by the AS) and on the Broadsoft platform the user goes in the "Sign-In" status, but since we're not able to declare the user "Available", we can get no incoming call from the call center (FYI, the "Sign-In" status means the operator is present but still not ready to receive calls)
Did anyone have the same problem?
Does anyone know how we can get the Available//Unavailable button on the programmable key?
Here's an extract from the MAC-oriented config file:
account.1.sip_server_type = 2
account.1.acd.enable = 1
account.1.acd.available = 1
account.1.acd.unavailable_reason_enable = 1
account.1.acd.initial_state = 1
We're testing the fw 28.71.193.8 for T46G and 36.71.193.7 for T41P.
Thanks!
RE: Broadsoft ACD feature with Yealink T4x - Yealink Support - 04-23-2014 11:42 AM
Please go to webpage->Features->ACD, then enable "ACD Auto Available".
Do you reset to factory and test again?
What is the lable of softkeys when you sign-in?
RE: Broadsoft ACD feature with Yealink T4x - acantho - 04-23-2014 10:26 PM
(04-23-2014 11:42 AM)Yealink Support Wrote: Please go to webpage->Features->ACD, then enable "ACD Auto Available".
Do you reset to factory and test again?
What is the lable of softkeys when you sign-in?
The ACD Auto Available feature was already enabled and I've tried a couple of times to reset to factory and start again from scartch, but nothing changed.
I've attached a cap file of the SUBSCRIBE msg sent by the T46G phone when the ACD Login button is pressed, but the point is that on Broadsoft AS, the ACD status of the user line becomes "Sing-In" and not "Available", so no incoming call is passed to the operator.
On the other side, after pressing the Login button, there's no change on the softkey labels, even if the sing-in procedure succedes.
Thanks!
RE: Broadsoft ACD feature with Yealink T4x - Yealink Support - 04-24-2014 07:42 PM
Sorry. In order to do more troubleshootings, please supply syslog level 6, config.bin and pcap to your distributor.
How to Get the Correct Syslog, Config.bin and Trace
They can help to submit to the corresponding technical specialist.
RE: Broadsoft ACD feature with Yealink T4x - Yealink Support - 04-26-2014 11:53 AM
What is the version of your broadsoft?
RE: Broadsoft ACD feature with Yealink T4x - acantho - 04-28-2014 03:43 PM
(04-26-2014 11:53 AM)Yealink Support Wrote: What is the version of your broadsoft?
It's BroadWorks Rel. 19sp1: do you know of any issue with this Broadworks release?
Thanks
RE: Broadsoft ACD feature with Yealink T4x - Yealink Support - 04-28-2014 05:15 PM
We will update CPE-kits after the May Day holiday. Please
RE: Broadsoft ACD feature with Yealink T4x - Yealink Support - 04-28-2014 05:28 PM
Can you send your CPEkit of T46G and T41P for me?
RE: Broadsoft ACD feature with Yealink T4x - acantho - 04-28-2014 06:19 PM
(04-28-2014 05:28 PM)Yealink Support Wrote: Can you send your CPEkit of T46G and T41P for me?
Please, find attached the exported CPEKits for T46G and T41P we're currently using on our Broadsoft platform.
Thanks
RE: Broadsoft ACD feature with Yealink T4x - Yealink Support - 05-03-2014 11:05 AM
Sorry. I can't find wrong parameter in your CPEkits. Please supply syslog level 6, config.bin and pcap to your distributor.
They can help to submit to the corresponding technical specialist.