Yealink Forums
T28P with custom logo backlight issue (SOLVED) - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T28P with custom logo backlight issue (SOLVED) (/showthread.php?tid=1604)



T28P with custom logo backlight issue (SOLVED) - Raffles - 04-17-2014 09:04 PM

Hi, I have a T28P with a custom logo. Every since upgrading to v72 the back-light comes on for no apparent reason. It stays on for around 18 seconds then goes off again. Unfortunately, it then comes back on approx 60 seconds later and repeats this [very] slow flashing cycle!

Is there a way to stop this happening?

cheers

Firmware Version 2.72.0.30
Hardware Version 1.0.0.1

EDIT : I'm guessing it's related to this : http://forum.yealink.com/forum/showthread.php?tid=1166

EDIT EDIT : Version 2.72.0.25 doesn't have this problem.


RE: T28P with custom logo backlight issue - Yealink Support - 04-22-2014 03:57 PM

Do you try 2.72.0.50 ?


RE: T28P with custom logo backlight issue - Raffles - 04-22-2014 06:18 PM

(04-22-2014 03:57 PM)Yealink Support Wrote:  Do you try 2.72.0.50 ?

Just tried it on my 'test' handset and all seems fine Smile

I'll roll it out to our provisioning servers now.

Thanks


RE: T28P with custom logo backlight issue - sixela - 05-01-2014 04:09 AM

(04-22-2014 06:18 PM)Raffles Wrote:  
(04-22-2014 03:57 PM)Yealink Support Wrote:  Do you try 2.72.0.50 ?
Just tried it on my 'test' handset and all seems fine Smile

I am experiencing the same bug on T28P with custom logo on firmware 2.72.0.30.

It seems that the firmware 2.72.0.50 for T28P has been removed from the Yealink website... it can't find it !


RE: T28P with custom logo backlight issue (SOLVED) - Raffles - 05-04-2014 05:47 PM

I've just noticed that as well. Maybe it's to do with the fact that redial now has a bug? I can send you .50 if you like, but I wouldn't recommend it just yet.