Yealink Forums
SIP Port problem - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: SIP Port problem (/showthread.php?tid=15710)

SIP Port problem - secureip - 05-27-2016 07:10 AM

Hi, I'm using T23G phone and I want to change the Port 5060 to 5067 on a phone but everytime I try this setting, the phone doesn't register.

I can do it with Cisco SPA303 but the Yealink doesn't work.

Any idea why?

RE: SIP Port problem - Yealink_Michael - 06-02-2016 05:58 AM


thanks for your information !

is the sip sever port request is 5067 ? if no , then the registration will failed !

you can provide the pcap file of Yealink phone for double check !

for how to get them , please refer to the FAQ below:

Yealink Wiki :

RE: SIP Port problem - secureip - 06-29-2016 05:41 AM

Sorry for the delays, I didn't get the reply notification.

My provider accept connexion from port 5060 to 5069. When all the phone use the port 5060, I have problem with the ringgroup option with my hosted PBX. Some phone rings ans other not. Since I assign port to all phone, no more problem now (with Cisco SPA303 phone).

But with the Yealink phone, the registration never works. I'm waiting a new power and I will retest it. And if needed, I will do a pcap file.

thx to you Smile