+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T28P v72 is always lagged after Asterisk reload (/showthread.php?tid=1569)
T28P v72 is always lagged after Asterisk reload - mkeuter - 04-15-2014 01:43 AM
My T28P with FW 2.72.0.30 is always lagged for about 10 seconds after an Asterisk reload. All other phones incl. a T38P and a W52P work. This behaviour is new since FW v72.
Apr 14 17:47:11 pbx local0.notice asterisk[15863]: NOTICE[13797]: cel_custom.c:95 in load_config: No mappings found in cel_custom.conf. Not logging CEL to custom CSVs.
Apr 14 17:47:14 pbx local0.notice asterisk[15863]: NOTICE[15889]: chan_sip.c:23569 in handle_response_peerpoke: Peer '15_yeal28p' is now Lagged. (2258ms / 2000ms)
Apr 14 17:47:24 pbx local0.notice asterisk[15863]: NOTICE[15889]: chan_sip.c:23569 in handle_response_peerpoke: Peer '15_yeal28p' is now Reachable. (171ms / 2000ms)
RE: T28P v72 is always lagged after Asterisk reload - Yealink Support - 04-15-2014 01:38 PM
Do you test with 2.72.0.25 or 2.71.0.165 ?
Do you reset to facotry and test again?
RE: T28P v72 is always lagged after Asterisk reload - mkeuter - 04-15-2014 04:55 PM
With 2.72.025 the problem is gone, so it started with 2.72.0.30.
RE: T28P v72 is always lagged after Asterisk reload - Yealink Support - 04-16-2014 01:57 PM
So please don't upgrade to 2.72.0.30. We will release V73 which are tested detailly and carefully. You can wait for this major version.
RE: T28P v72 is always lagged after Asterisk reload - mkeuter - 04-20-2014 06:41 PM
Just for fun I tried 2.72.0.50, but the problem appears there as well. So I went back again to 2.72.0.25.