+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: W52P Base issue (/showthread.php?tid=1562)
W52P Base issue - manderson - 04-12-2014 02:46 AM
I just purchased a W52P Base with two DECT phones. I am unable to get the W52P to grab a DHCP IP Address. The link light does not light up even though it does link up.
I hooked it up to a laptop running wireshark and I never see it attempt a DHCP discover.
Is this a know issue or do i have a faulty base unit?
RE: W52P Base issue - Yealink Support - 04-12-2014 10:15 AM
1. Is the memory of DHCP full? Do you test other DHCP server?
2. Do yo use Cisco SWITCH? Can you connect to other static IP address? Then go to the webpage->Network->Advanced, disable LLDP and test again.
3. Do you have other Yealink phones?