+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T41 Loosing programming (/showthread.php?tid=1554)
T41 Loosing programming - telone - 04-11-2014 03:15 AM
I have had about 3/4 T41P phones loose programming and default to factory mode. Also when that happens all my other T41 and T46G phones go into No Service and I need to power all phones to get back to working status.
Any one running into this ?
RE: T41 Loosing programming - Yealink Support - 04-11-2014 02:41 PM
1. "I have had about 3/4 T41P phones loose programming and default to factory mode."
Do you check the auto provisioning url in the webpage? Enter the webpage->Settings->Auto provision, check whether you filled a URL in the Server URL.
2. "Also when that happens all my other T41 and T46G phones go into No Service and I need to power all phones to get back to working status."
Do you check about your network connecting?
3. "No Service"
This means that you don't register an account successfully now.
RE: T41 Loosing programming - telone - 04-12-2014 05:46 PM
All the phones were not Auto Provisioned so the URL is blank. The phones were manually programmed.
As per no service it never registers not until I reset all
Thanks
RE: T41 Loosing programming - Yealink Support - 04-14-2014 10:36 PM
Which firmware of your phones now?
How often will the issue happen? One in every day?
Can you show more details with me ?