+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: T46g-power led settings for autoprovisioning (/showthread.php?tid=1516)
T46g-power led settings for autoprovisioning - pumexdev - 04-02-2014 12:52 PM
Hi all,
I need to set power led settings on my provisioning template for doing autoprovisioning.can anybody help me to find out what are the correct config parameters for pwerled settings.
thanks in advance.!
RE: T46g-power led settings for autoprovisioning - CWR - 04-02-2014 12:59 PM
You do not mention what firmware...
These are the options to try...
[attachment=696]
http://yealink.com/Upload/T4X/20140102/AutoProvisioning.zip
RE: T46g-power led settings for autoprovisioning - pumexdev - 04-02-2014 02:17 PM
(04-02-2014 12:59 PM)craigreilly Wrote: You do not mention what firmware...
These are the options to try...
http://yealink.com/Upload/T4X/20140102/AutoProvisioning.zip
thanks craigreilly.i missed to mention the firmware details in my post.those are given below
Firmware Version 28.72.0.1
Hardware Version 28.2.0.128.0.0.0
RE: T46g-power led settings for autoprovisioning - CWR - 04-03-2014 12:03 AM
The info I provided and the link are for the T4x series and v72 firmware.