+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Hot Desking - T38G (/showthread.php?tid=1509)
Hot Desking - T38G - tegos - 04-01-2014 09:38 PM
Hello,
I have a T38G and would like to use hot-desking.
We need the phone for a shared desk.
The Problem ist the SIP IP-Address. I cannot ask users to put the IP everythime when they logon.
Is there any solution for this issue? We use 3CX Version 11 SP4
Firmware Version 38.70.0.125
Hardware Version 21.5.5.160.64.0.0
Best regards
RE: Hot Desking - T38G - Yealink Support - 04-02-2014 05:58 PM
You can configure it via auto provisioning. Please pay attention to red color syntax.
------------------------------------------------------------
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted.##
#######################################################################################
## Hot Desking ##
#######################################################################################
#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled;
#hotdesking.startup_register_name_enable = 0 (default)
#hotdesking.startup_username_enable = 1 (default)
#hotdesking.startup_password_enable = 1 (default)
#hotdesking.startup_sip_server_enable = 1 (default)
#hotdesking.startup_outbound_enable = 0 (default)
hotdesking.startup_register_name_enable =
hotdesking.startup_username_enable =
hotdesking.startup_password_enable =
hotdesking.startup_sip_server_enable =
hotdesking.startup_outbound_enable =
#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key;
#0-Disabled, 1-Enabled;
#hotdesking.dsskey_register_name_enable = 0 (default)
#hotdesking.dsskey_username_enable = 1 (default)
#hotdesking.dsskey_password_enable = 1 (default)
#hotdesking.dsskey_sip_server_enable = 1 (default)
#hotdesking.dsskey_outbound_enable = 0 (default)
hotdesking.dsskey_register_name_enable =
hotdesking.dsskey_username_enable =
hotdesking.dsskey_password_enable =
hotdesking.dsskey_sip_server_enable = 0
hotdesking.dsskey_outbound_enable =
------------------------------------------------------------