Yealink Forums
Broadsoft/T49G sip ports error - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Broadsoft/T49G sip ports error (/showthread.php?tid=14637)



Broadsoft/T49G sip ports error - davem2626 - 05-05-2016 11:05 PM

Hi all

I was wondering why a T49G would respond to a Broadsoft AS via the source port rather than the contact address port?:

I have tried setting sip.send_response_by_request = 1 but doesn't seem to have made a difference...

FW version = 51.80.0.80

Cheers in advance


RE: Broadsoft/T49G sip ports error - Karl_Yealink - 05-07-2016 06:21 AM

(05-05-2016 11:05 PM)davem2626 Wrote:  Hi all

I was wondering why a T49G would respond to a Broadsoft AS via the source port rather than the contact address port?:

I have tried setting sip.send_response_by_request = 1 but doesn't seem to have made a difference...

FW version = 51.80.0.80

Cheers in advance

Do you send an email to support@yealink.com for help already?
If yes, we will help you via the support team.

If not, please help us to get the pcap and syslog and config.bin files.
You can know how to do from the FAQ: http://support.yealink.com/faq/faqInfo?id=311

BTW, how many phones do you have? All phones have this problem?