Can't set empty password with v70 provisioning - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: Can't set empty password with v70 provisioning (/showthread.php?tid=1463) |
Can't set empty password with v70 provisioning - tomeko - 03-25-2014 12:08 AM Hello, after upgrading phones to v7x I'm not able to set empty password using provisiong. I'm trying to use line: security.user_password = admin: but it seems to have no effect. Setting empty password was possible with previous v6x T2x/T3x provisioning. RE: Can't set empty password with v70 provisioning - CWR - 03-25-2014 03:06 AM This was a security feature of v7x software. It has actually been relaxed a bit and previously required letters and numbers. RE: Can't set empty password with v70 provisioning - tomeko - 03-25-2014 05:37 PM Seems to be overly restrictive considering nature of provisioning and PnP where both transaction sides often can be spoofed so security is in administrator hands anyway, but thanks for clarification. |