+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Accessories (/forumdisplay.php?fid=28)
+--- Thread: T46G + EXP40 + EHS36 (/showthread.php?tid=1436)
Pages: 1 2
T46G + EXP40 + EHS36 - Kriss - 03-17-2014 09:30 PM
Hi team,
I can't manage to use the EHS36 when plugged to the EXP40 (itself plugged on a T46 phone).
On the other hand, all is Ok when plugged directly on the T46.
Do i need some EXP40 firmware update or something ?
Thanks for your feedback,
./Kriss
RE: T46G + EXP40 + EHS36 - wiredservices - 03-18-2014 10:38 AM
This is precisely the setup I intend to deploy next week so I would also appreciate some feedback.
Thanks.
RE: T46G + EXP40 + EHS36 - Yealink Support - 03-19-2014 02:36 PM
Hi all,
1. Please upgrade your EHS36 to the latest version.
[FAQ]How to upgrade EHS36?
2. Please make sure you connect them as this order: T46-EXP40-EHS36-wireless headset
Jabra
Plantronics
RE: T46G + EXP40 + EHS36 - MaxoTel SSO - 05-09-2014 10:42 AM
[quote='Yealink Support' pid='6011' dateline='1395211012']
Hi all,
1. Please upgrade your EHS36 to the latest version.
2. Please make sure you connect them as this order: T46-EXP40-EHS36-wireless headset
------
Hi Guys,
I'm using the Plantronics C6540 headset, the Yealink EHS36 and the EXP40 on the Yealink T46G, but cannot answer or hang up calls via the headset button.
I've upgraded the Firmware as bellow:
T46G Firmware: 28.72.0.205
EXP40 Firmware: 6.16.0.0
EHS36 Firmware: 3.16.0.0
The Answering seems to work via the Yealink T28P, but not through the Yealink T46G. Can anybody help me?
Thanks,
Mason
RE: T46G + EXP40 + EHS36 - Yealink Support - 05-12-2014 07:44 PM
Hi Mason,
Please upgrade your T46G firmware to the latest one and don't use the special firmware 28.72.0.205 which only used to upgrade EHS/EXP40.
RE: T46G + EXP40 + EHS36 - MaxoTel SSO - 05-13-2014 06:37 AM
(05-12-2014 07:44 PM)Yealink Support Wrote: Hi Mason,
Please upgrade your T46G firmware to the latest one and don't use the special firmware 28.72.0.205 which only used to upgrade EHS/EXP40.
We have multiple EHS36 Devices. The one I used on the T28P did not have the 'Special Firmware' on it.
RE: T46G + EXP40 + EHS36 - Kriss - 05-13-2014 02:47 PM
Hi all,
It works on our side with the upgraded EHS36 + EXP40 + T46G.
Thanks,
./Kriss
RE: T46G + EXP40 + EHS36 - Yealink Support - 05-13-2014 02:52 PM
What is your firmware of T46G now? I advise you to upgrade firmware of T46G and test again.
RE: T46G + EXP40 + EHS36 - commsys - 05-30-2014 07:57 AM
EDITED: sorry wrong thread, but if you are using a CS540 try the below.
This issue keeps popping up, after a firmware update if its still not working its the 3.5mm audio jack, the yealink ones are slightly shorter than standard, if you could please push and hold the 3.5mm jack into the plantronics base and try to answer a call.
If that works, it means you need to buy another 3.5mm audio cable.
Yealink support, could you recommend trying this for all posts regarding the CS540 specifically. As it happens with all of them. Have tested with multiple new CS540 and other plantronic 500 series and it appears only for the 540.
RE: T46G + EXP40 + EHS36 - nickmancini - 10-02-2014 06:16 AM
Will the EHS36 work when there are multiple (3) EXP40 units connected to a T46G? I can make it work fine with a single EXP40, but with 3 EXP40s it doesn't quite work, even if the EXP40s are powered with a power supply.
Frustrating....
(03-19-2014 02:36 PM)Yealink Support Wrote: Hi all,
1. Please upgrade your EHS36 to the latest version.
[FAQ]How to upgrade EHS36?
2. Please make sure you connect them as this order: T46-EXP40-EHS36-wireless headset
Jabra
Plantronics