VP530-Autoprovisioning-dialplan not showing on web gui - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: VP530-Autoprovisioning-dialplan not showing on web gui (/showthread.php?tid=1433) |
VP530-Autoprovisioning-dialplan not showing on web gui - pumexdev - 03-17-2014 03:31 PM phone model: Yealink VP530 Firmware Version 23.70.0.40 Hardware Version 23.5.1.201.18.0.8 All other options except dialplan are showing on the web gui of the phone.When i try an export of the phone config ,the dialplans which i set through my autoprovisoning template are available inside <dialnow></dialnow> tags. Dialplan options configured throgh the template are given below (detailed template is attached) dialplan.dialnow.rule.2=00[2,3,4,7,8]xxxxxxxx dialplan.dialnow.line_id.2= dialplan.dialnow.rule.1=000 dialplan.dialnow.line_id.1= dialplan.replace.prefix.2=0(.) dialplan.replace.replace.2=$1 dialplan.replace.line_id.2= dialplan.replace.prefix.1=000 dialplan.replace.replace.1=000 dialplan.replace.line_id.1= dialplan.dialnow.rule.3=0[8,9]xxxxxxx dialplan.dialnow.rule.4=[1,2,4,5,8,9][0,1,2,3,4,6,7]xx dialplan.dialnow.rule.5=01xxxxxxxxx dialplan.dialnow.rule.6=01[3,8]xxxxxxxx dialplan.dialnow.rule.7= dialplan.dialnow.rule.8= dialplan.dialnow.rule.9= dialplan.dialnow.rule.10= dialplan.dialnow.line_id.3= dialplan.dialnow.line_id.4= dialplan.dialnow.line_id.5= dialplan.dialnow.line_id.6= dialplan.dialnow.line_id.7= dialplan.dialnow.line_id.8= dialplan.dialnow.line_id.9= dialplan.dialnow.line_id.10= dialplan.replace.prefix.3= dialplan.replace.prefix.4= dialplan.replace.prefix.5= dialplan.replace.prefix.6= dialplan.replace.prefix.7= dialplan.replace.prefix.8= dialplan.replace.prefix.9= dialplan.replace.prefix.10= dialplan.replace.replace.3= dialplan.replace.replace.4= dialplan.replace.replace.5= dialplan.replace.replace.6= dialplan.replace.replace.7= dialplan.replace.replace.8= dialplan.replace.replace.9= dialplan.replace.replace.10= dialplan.replace.line_id.3= dialplan.replace.line_id.4= dialplan.replace.line_id.5= dialplan.replace.line_id.6= dialplan.replace.line_id.7= dialplan.replace.line_id.8= dialplan.replace.line_id.9= dialplan.replace.line_id.10= and phone config shows <dialnow> <data rule="000" /> <data rule="00[2,3,4,7,8]xxxxxxxx" /> <data rule="0[8,9]xxxxxxx" /> <data rule="[1,2,4,5,8,9][0,1,2,3,4,6,7]xx" /> <data rule="01xxxxxxxxx" /> <data rule="01[3,8]xxxxxxxx" /> </dialnow> <dialrule> <data rule="000" replace="000" /> <data rule="0(.)" replace="$1" /> </dialrule> But there is no dialplan showing under the dialplan tab of the web gui. Has anybody seen something similar or have any suggestions? RE: VP530-Autoprovisioning-dialplan not showing on web gui - Yealink Support - 03-21-2014 08:52 PM Hi pumexdev, Sorry. I think it is the display issue because the dialnow rule can be applied. RE: VP530-Autoprovisioning-dialplan not showing on web gui - pumexdev - 03-25-2014 05:15 PM (03-21-2014 08:52 PM)Yealink Support Wrote: Hi pumexdev, any solution for this? RE: VP530-Autoprovisioning-dialplan not showing on web gui - Yealink Support - 03-25-2014 05:59 PM I have submitted it to our R&D. They will fix it. RE: VP530-Autoprovisioning-dialplan not showing on web gui - pumexdev - 03-25-2014 06:29 PM (03-25-2014 05:59 PM)Yealink Support Wrote: I have submitted it to our R&D. They will fix it. thanks a lot.waiting for the solution. RE: VP530-Autoprovisioning-dialplan not showing on web gui - pumexdev - 03-26-2014 10:08 AM (03-25-2014 06:29 PM)pumexdev Wrote:(03-25-2014 05:59 PM)Yealink Support Wrote: I have submitted it to our R&D. They will fix it. any update? RE: VP530-Autoprovisioning-dialplan not showing on web gui - pumexdev - 03-27-2014 10:59 AM (03-26-2014 10:08 AM)pumexdev Wrote:(03-25-2014 06:29 PM)pumexdev Wrote:(03-25-2014 05:59 PM)Yealink Support Wrote: I have submitted it to our R&D. They will fix it. still waiting for a positive response RE: VP530-Autoprovisioning-dialplan not showing on web gui - pumexdev - 03-28-2014 10:17 AM (03-27-2014 10:59 AM)pumexdev Wrote:(03-26-2014 10:08 AM)pumexdev Wrote:(03-25-2014 06:29 PM)pumexdev Wrote:(03-25-2014 05:59 PM)Yealink Support Wrote: I have submitted it to our R&D. They will fix it. please help RE: VP530-Autoprovisioning-dialplan not showing on web gui - pumexdev - 04-10-2014 11:39 AM (03-28-2014 10:17 AM)pumexdev Wrote:still waiting...please help(03-27-2014 10:59 AM)pumexdev Wrote:(03-26-2014 10:08 AM)pumexdev Wrote:(03-25-2014 06:29 PM)pumexdev Wrote:(03-25-2014 05:59 PM)Yealink Support Wrote: I have submitted it to our R&D. They will fix it. |