How can I capture the network traffic of the phone remotely? - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: How can I capture the network traffic of the phone remotely? (/showthread.php?tid=14095) |
How can I capture the network traffic of the phone remotely? - celtic66 - 04-21-2016 01:50 AM Yealink, I want to add this as a feature request if possible. Polycom currently allows you to capture traffic using Wireshark by setting up a remote interface(s) that talk directly to the phones. They added two commands to their config file: diags.pcap.enabled="1" diags.pcap.remote.enabled="1" Now you just use the IP address of the phone as an interface. Just thought this would be a good addition to the Yealink config files. RE: How can I capture the network traffic of the phone remotely? - Karl_Yealink - 04-27-2016 05:58 PM Thank you for your suggestion. I will submit this suggestion to our PD. Hope they will add this function in future. |