+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T41 and BLF (/showthread.php?tid=1399)
T41 and BLF - troosters - 03-11-2014 04:02 PM
Hi,
I have 3cx v11 free version installed with 5 T41 devices with firmware 36.71.0.53 .
I manually registered the devices and created the BLF buttons.But the leds do not lit for the BLF keys ?
Why is that ?
RE: T41 and BLF - Yealink Support - 03-11-2014 06:16 PM
Hi troosters,
Please enable BLF led in webpage.
Features->General Information,disable "LED Off in Idle"
RE: T41 and BLF - troosters - 03-11-2014 06:19 PM
The function "LED Off in Idle" is set to "enabled"
Doesn't it need to be 'Disabled' then ?
RE: T41 and BLF - troosters - 03-14-2014 03:40 AM
I set it to disabled and I then even upgraded it to the latest 72 firmware,( where there are multiple schemas for the blf when in idle method ?)
but only the line key button gets green when I pick up the speaker. For the rest the lights are not working ?
RE: T41 and BLF - CWR - 03-14-2014 04:20 AM
BLF Status Updates are not available in the 3cx FREE VERSION.
http://www.3cx.com/phone-system/3CXPhoneSystem_brochure.pdf
RE: T41 and BLF - Yealink Support - 03-19-2014 04:06 PM
(03-14-2014 03:40 AM)troosters Wrote: I set it to disabled and I then even upgraded it to the latest 72 firmware,( where there are multiple schemas for the blf when in idle method ?)
but only the line key button gets green when I pick up the speaker. For the rest the lights are not working ?
As craig told, do you use a free version of 3CX? Do you contact with 3CX for help?
RE: T41 and BLF - troosters - 03-19-2014 05:30 PM
YEs, sorry I have been away for a while. But it is a free edition. So I have my answer