Yealink Forums
t38 firmware features - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: t38 firmware features (/showthread.php?tid=1394)



t38 firmware features - CWR - 03-11-2014 04:07 AM

Can anyone tell me if T38 38.70.0.180 has Multicast Paging and Listening? I do not have a spare phone at the moment.
Thx


RE: t38 firmware features - Yealink Support - 03-11-2014 04:37 PM

Sorry. We have added multicast paging in 3x.70.0.198 which bases in 3x.70.0.180.


RE: t38 firmware features - CWR - 03-11-2014 08:51 PM

ok except that version is not available in the support section to download.


RE: t38 firmware features - Yealink Support - 03-12-2014 03:35 PM

I think you ever post similar question in this thread. http://forum.yealink.com/forum/showthread.php?tid=1056


RE: t38 firmware features - jasit - 03-12-2014 10:57 PM

Craig, go with the 38.70.1.6.rom a lot better then the .198 the transfers don't have the delay in them and it was also designed for the 3cx system and supports multicast.


RE: t38 firmware features - CWR - 03-13-2014 12:21 AM

.1.6 isn't released as was 0.198.
I haven't had any complaints yet on 198 but will keep in mind this post.

There must be a reason 3cx hasn't posted it in v12 yet ?!?

(03-12-2014 03:35 PM)Yealink Support Wrote:  I think you ever post similar question in this thread. http://forum.yealink.com/forum/showthread.php?tid=1056

It's so hard to keep up with the unpublished versions...

Thank you.

It seems 3cx now will supply the firmware for the phones and will auto-download it when needed.

Thanks.


RE: t38 firmware features - jasit - 03-14-2014 09:52 PM

Quote:It's so hard to keep up with the unpublished versions...

Thank you.

It seems 3cx now will supply the firmware for the phones and will auto-download it when needed.

Thanks.
I have the same problem, the only concern I have is that most of the 3cx ones don't include the multicast. If you look at the following folder
ftp://ftp.yealink.com/00.Firmwares/T3X/3CX/ username/password yealinkftp

the new version is there for the T38 but not the T32.

jasit


RE: t38 firmware features - CWR - 03-14-2014 10:49 PM

I get concerned when 3cx does not include it in their downloads... Maybe I'll find a phone to test it on. I am trying to phase the 38's into remote offices and buy 46's for the corporate office...
Wonder why they keep wavering on multicast... or they have too many people programming and the left hand isn't talking to the right hand...
Thanks for the link...


RE: t38 firmware features - jasit - 03-14-2014 11:35 PM

(03-14-2014 10:49 PM)craigreilly Wrote:  I get concerned when 3cx does not include it in their downloads... Maybe I'll find a phone to test it on. I am trying to phase the 38's into remote offices and buy 46's for the corporate office...
Wonder why they keep wavering on multicast... or they have too many people programming and the left hand isn't talking to the right hand...
Thanks for the link...

We have been using the new version for a couple of weeks on 3cx version 11. it definitely improves the transfer time for our receptionst.

ya, since yealink and 3cx are working together on their firmware, I don't understand why we have to keep requesting it, you think 3cx would just have multicast as a requirement for their version of the firmware.