+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46 fills all unset blf's (/showthread.php?tid=13848)
T46 fills all unset blf's - KristianMedK - 04-11-2016 04:32 PM
I've encountered a few issues with T46, where it, seemingly out of nowhere, fills all empty blf buttons with a label "SpeedDial_Idle", which then have to be manuelly removed or overwritten with something else.
I haven't been able to deliberately introduce this error with autoprovisioning.
Is this a known issue, or do you have any idea as to why this could happen ?
The phones where this happened are running firmware 28.80.0.70.
RE: T46 fills all unset blf's - Karl_Yealink - 04-13-2016 05:58 AM
Do you mean that the phone will auto configure empty button with a label "SpeedDial_Idle"?
I think maybe there is auto provision in your side, can you check whether some auto provision occur in your side?
RE: T46 fills all unset blf's - KristianMedK - 04-13-2016 01:49 PM
There is autoprovisioning, but i've checked the configuration we're sending, and it doesn't contain blf's, which does not have a value, and there has been no code changes to the script generating the configuration file, between the error being reported, and debugging the issue.
I haven't been able to reproduce it on my own T46 neither.
This isn't a known to happen, rarely, on any yealink phones ?