+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: CP860 (/forumdisplay.php?fid=43)
+--- Thread: CP860 change sensitivity of Microphones (/showthread.php?tid=13768)
CP860 change sensitivity of Microphones - universe.noc - 04-08-2016 01:04 AM
Hi,
Is it possible to adjust the sensitivity of the microphones on the CP860.
Users report that remote parties often complain of quiet transmission and ask the users to repeat louder.
We are testing with CP860-37.80.0.10 and have tried earlier releases too.
I have tried - and failed to adjust using the voice.handfree_send provisioning parameter.
thanks
Adam
RE: CP860 change sensitivity of Microphones - Yealink_Michael - 04-08-2016 06:25 AM
hi Adam
thanks for your information
for this issue, have you try to reset the phone and test again ?
as we have not hear about this issue before, so please check if the customer leaves the CP860 too far away, as the voice capture range is 10-feet
at last , i have confirm that CP860 can't support voice.handfree_send provisioning parameter for the present .
let me know if any update
TKS & BR
Michael
RE: CP860 change sensitivity of Microphones - universe.noc - 04-13-2016 10:33 PM
Hi, We have reset the phone of course and also tried using the extension microphones.
If the conference phone is used to call a 3rd party, then the 3rd party can turn up their volume and work around the problem,
But the problem is more pronounced when the CP860 is used to dial into a cloud conference bridge with multiple parties in the call.
Example: CP860 ->>>> Cloud conference service >>>>> multiple other callers.
If the multiple other callers can all hear themselves OK, the CP860 sounds very quiet.
If the multiple other parties turn up the volume to correctly hear the CP860, then when the multiple other parties resume talking - they are too loud.
Does this make sense?
Adam
ps, sorry for the late reply - didn't receive an update email from the forum server
RE: CP860 change sensitivity of Microphones - david@computerstlouis.com - 04-21-2016 10:43 PM
we are having the same issue with multiple Clients. The phone are no more than 4 feet away from them. Is there anyway to change the gain in the provisioning templates?
RE: CP860 change sensitivity of Microphones - universe.noc - 04-26-2016 11:34 PM
(04-21-2016 10:43 PM)david@computerstlouis.com Wrote: we are having the same issue with multiple Clients. The phone are no more than 4 feet away from them. Is there anyway to change the gain in the provisioning templates?
Hi Yealink - please can you consider this message a bump to look into this issue?
We're under pressure to provide an alternative to our clients.
Thanks
Adam
RE: CP860 change sensitivity of Microphones - snv-it - 04-29-2016 07:01 PM
We are currently testing the CP860 and if I call me on the iPhone, it is barely audible quietly, while calls from other phones are easily audible.
In this state the CP860 can not be used as a conference phone.
Firmwar 37.80.0.10
RE: CP860 change sensitivity of Microphones - 3CTechnology - 07-22-2016 02:12 PM
Hi Just want to add my voice here. We are also experiencing very low mic send volume on all of our CP860's About 20 in total tried newest firmware with no change.
RE: CP860 change sensitivity of Microphones - Yealink_Michael - 07-22-2016 03:33 PM
hi all
sorry for the inconvenience , our R&D have released a firmware that can support adjust the send volume through auto provision , download link below :
http://ftp.yealink.com/?ShareToken=2085A1F72DB4B3083C576FD6BC31B17F619B2399
auto provision sentence :
voice.handfree_send=
voice.handset_send=
voice.headset_send=
Value range : Integer from -50 to 50
TKS & BR
Michael
RE: CP860 change sensitivity of Microphones - 3CTechnology - 07-22-2016 04:49 PM
(07-22-2016 03:33 PM)Yealink_Michael Wrote: hi all
sorry for the inconvenience , our R&D have released a firmware that can support adjust the send volume through auto provision , download link below :
http://ftp.yealink.com/?ShareToken=2085A1F72DB4B3083C576FD6BC31B17F619B2399
auto provision sentence :
voice.handfree_send=
voice.handset_send=
voice.headset_send=
Value range : Integer from -50 to 50
TKS & BR
Michael
Hi Michael
This is all good tx but where should those lines be added for 3cx ?
Cheers
RE: CP860 change sensitivity of Microphones - Sas - 08-14-2017 02:45 AM
Hello.
Have the same problems with yealink cp860. The dynamics are weak. On the phone the volume is at the maximum. Audibility is low.
Connect 2 headsets - does not help.
How can I increase the sensitivity of the microphone and increase the volume of the speakers.
http://ftp.yealink.com/?ShareToken=2085A...7F619B2399 - link does not work.
Thank you.