+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: SIP-T28P UCM1608 (/showthread.php?tid=1373)
SIP-T28P UCM1608 - dante5do - 03-08-2014 02:22 AM
Someone set up the pbx UCM1608 GRANDSTREAM with SIP-T28P although recorded, rings and answering the call is cut
appreciate their support
Dante Aguirre
http://www.bksistemas.net
dante.aguirre @ bksistemas.net
RE: SIP-T28P UCM1608 - Yealink Support - 05-13-2014 09:08 AM
Hi Dante,
Please make sure you have configured correct voice settings in your PBX.
Do your other brand phone work well?
RE: SIP-T28P UCM1608 - dante5do - 05-14-2014 12:07 AM
(05-13-2014 09:08 AM)Yealink Support Wrote: Hi Dante,
Please make sure you have configured correct voice settings in your PBX.
Do your other brand phone work well?
I have a snom and Grandstream smoothly, I indicated that this yealink is validated but not working, against a pure asterisk if it works well.
Dante Aguirre
http://www.bksistemas.net
RE: SIP-T28P UCM1608 - Yealink Support - 05-14-2014 04:11 PM
I can't define your problem without anything.
In order to do more troubleshootings, please supply syslog level 6, config.bin and pcap to your distributor , support@yealink.com or support.usa@yealink.com.
How to Get the Correct Syslog, Config.bin and Trace