Yealink Forums
Mikrotik POE - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Mikrotik POE (/showthread.php?tid=1371)



Mikrotik POE - schmerold - 03-08-2014 01:29 AM

Is anyone using the passive poe output of the Mikrotik RB750UP to power their Yealink phones? I am using the T20P & T42G

Also, any input regarding use of the Mikrotik is welcome.


RE: Mikrotik POE - schmerold - 03-10-2014 04:18 AM

Mikrotik POE will power a Ubitquiti UniFi access point.

It will not power Yealink phones.


RE: Mikrotik POE - Yealink Support - 05-12-2014 09:57 AM

Hi schmerold,

Yealink phones are IEEE 802.3af compatible device.
[Standards of POE]
Yealink POE standards for the main power supply characteristic parameters of the power supply system:
1. The voltage between 44 ~ 57 V, typical values is 48 V.
2. Allow the maximum current 550 mA; the biggest starting current is 500 mA.
3. The typical working current is 10 ~ 350 mA, the overload test current is 350~500 mA.
4. The biggest current is 5 mA in condition of no load.


RE: Mikrotik POE - kohan - 07-22-2015 12:01 AM

Sir, so Can your mikrotik PoE charge yealink ip phone?