+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: Template update not working on T48G Expansion module (/showthread.php?tid=13700)
Template update not working on T48G Expansion module - tas7330 - 04-05-2016 11:56 AM
Hello Yealink users,
I have a T48G with the latest firmware 35.80.0.95 that fails to update changes made to the expansion module section of the template within freepbx endpoint manager. Changes made to the DSS Line keys 1-29 all update fine but the expansion module fails to update after multiple reboots and a firmware upgrade. Does anyone have any idea why this problem exists?
Endpoint manager version 2.11.0.2.00
Believe I may have found the answer
http://community.freepbx.org/t/endpoint-manager-expansion-module-issue/28881
RE: Template update not working on T48G Expansion module - Karl_Yealink - 04-13-2016 06:02 AM
If you manual change the configuration to the expansion, can it work?
Can you send the template to me, so I can check and test here?
RE: Template update not working on T48G Expansion module - Horence - 04-28-2016 02:44 PM
This is a happy tour for me to read on your post, thanks.