Yealink Forums
Problem with Cisco EHWIC-4ESG - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Problem with Cisco EHWIC-4ESG (/showthread.php?tid=1363)



Problem with Cisco EHWIC-4ESG - Keren01 - 03-06-2014 12:02 PM

Just wondering if the EHWIC-4ESG be used in a Cisco 800 router.I want to add at least one additional port, so the 4ESG would be a good fit.If i can't use EHWIC in it, which router should i use ? Is Cisco 1941/K9 router ok ?


RE: Problem with Cisco EHWIC-4ESG - CWR - 03-06-2014 01:27 PM

This is probably not the right place for a Cisco router question...