Missing Upgrade Button at webui - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Missing Upgrade Button at webui (/showthread.php?tid=1338) |
Missing Upgrade Button at webui - ravensworld - 02-28-2014 03:23 AM Hi, how I can upgrade the firmware for my new yealink T41P (current firmware 36.71.0.40) via webUI. I miss the *upgrade* button at the main menu. thx for help. RE: Missing Upgrade Button at webui - Yealink Support - 02-28-2014 10:26 AM Hi can you upgrade the version by auto provisoning method? Enter the webpage->Settings->Auto provision, fill your auto provision url to upgarde the version. RE: Missing Upgrade Button at webui - ravensworld - 02-28-2014 08:42 PM (02-28-2014 10:26 AM)Yealink Support Wrote: Hi can you upgrade the version by auto provisoning method? Of course I can do that, but not within 2 minutes. Because I have no web-services running at the phone VLAN. If that is the only way, I have no choice?! RE: Missing Upgrade Button at webui - Yealink Support - 03-01-2014 11:09 AM 1. Can you reset to factory and test again? Long press OK button when phone is idle. 2. Ask your distibutor for help. They have many ways to help you out. |