multicast paging T-19 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: multicast paging T-19 (/showthread.php?tid=13350) |
multicast paging T-19 - jpinder70 - 03-14-2016 11:12 PM Hi, I'm using freeswitch pbx to page using multicast pages from T19P to a multicast IP:PORT. I'm doing this because you cant perform a multicast page from the T19. What's happening is: the page I'm paging from automatically goes to hold because the multicast IP:PORT is also included on the page I'm paging from, I have to have this address on any phone because we want to page from any phone in the building. I test it using xlite and it works perfectly all the phones come on and the audio is great without issues. Is there a way I can disable the call being places on hold from the phone i'm paging from or is this a bug? RE: multicast paging T-19 - abe_b - 03-15-2016 12:12 AM (03-14-2016 11:12 PM)jpinder70 Wrote: Hi,Hi, You will need to disable "Paging Barge" Go to: Directory>Multicast IP>Paging Barge: select "disabled" This will ignore an incoming page announcement if the phone is on an active call RE: multicast paging T-19 - jpinder70 - 03-15-2016 01:28 AM THANK YOU! THANK YOU! THANK YOU! That resolved the issue RE: multicast paging T-19 - abe_b - 03-16-2016 04:08 AM (03-15-2016 01:28 AM)jpinder70 Wrote: THANK YOU! THANK YOU! THANK YOU! That resolved the issue Always a pleasure |