+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Valid certification authorities (/showthread.php?tid=13348)
Valid certification authorities - lonvoice - 03-14-2016 07:51 PM
A while back we had a problem (we think) because a CA wasn't supported.
Can you confirm that we can use 'Start SSL' to generate certificates ( https://www.startssl.com/ ) with standard firmware? If not, how do we go about getting it supported, as this is where we source all our certificates...
RE: Valid certification authorities - Karl_Yealink - 03-15-2016 07:18 PM
You can check by yourself from this FAQ: http://support.yealink.com/faq/faqInfo?id=2
And if it don't contacin the 'Start SSL', you can get more help from the FAQ: http://support.yealink.com/faq/faqInfo?id=13
RE: Valid certification authorities - lonvoice - 03-16-2016 11:42 PM
Thanks - can you confirm that the default setting for 'only accept trusted certificates' is 'disabled'? IE, we can use any certification authority, and a T46 reset to factory defaults will accept the certificate?
RE: Valid certification authorities - Karl_Yealink - 03-18-2016 05:29 PM
The default is enable.